MakerFocus ESP32 OLED WiFi Kit V3 Integrated WiFi Bluetooth CP2102 IoT Development Board with 0.96-inch OLED Display for Arduino IoT Intelligent Scenes

Brand: MakerFocus

Features:

• Support Arduino Development Environment: WiFi kit 32 is a classic IoT Dev-board, it’s a highly integrated development board based on ESP32 (Including WiFi and BLE), fully support Arduino development environment
• Highly Integrated: Onboard WiFi, Bluetooth 2.4GHz PCB antenna. Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
• Power Supply Method: Onboard SH1.25 battery interface, integrated lithium battery management system. You can also use the Type-C interface to power the development board
• Highly Interactive: Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power and other information
• Widely Application: With good RF circuit and low-power design, ESP32 development board is the best choice for smart cities, farms, homes and IoT makers

model number: 8541612336

Part Number: UZM173505AEVXI378

Details: WiFi Kit 32 (V3) is a classic IoT development board. It’s a highly integrated product based on ESP32(including WiFi and BLE), Li-Po battery management system, 0.96” OLED are also included. It’s the best choice for smart cities, farms homes and IoT makers

Features:
1. Microprocessor: ESP32-S3FN8 (Main frequency up to 240 MHz)
2. Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures
3. Onboard SH1.25-2 battery interface, integrated lithium battery management system 4. Onboard Wi-Fi, Bluetooth 2.4GHz PCB antenna
5. Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power and other information
6. Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
7. Support the Arduino development environment

Parameter:
WiFi: 802.11 b/g/n, up to 150Mbps
Bluetooth: Bluetooth LE, Bluetooth 5, Bluetooth mesh
Hardware Resource: 7*ADC1+2*ADC2; 7*Touch; 3*UART; 2*I2C; 2*SPI, etc.
Memory: 384KB ROM; 512KB SRAM; 16KB RTC SRAM; 8MB SiP Flash
Interface: Type-C USB; 2*1.25 lithium battery interface; 2*18*2.54 Header Pin
Battery: 3.7V lithium battery power supply and charging
Power consumption: Deep sleep 10 uA
Operating temperature: -20~70℃
Dimensions: 50.2 * 25.5* 10.2 mm

Package Content:
1 * Power Cord
1 * ESP32 Development Board
2 * Pin Headers

EAN: 0190033879688

Package Dimensions: 2.8 x 2.5 x 0.6 inches